HY-CW3014-P / How to mount the Hybrone Omni Volt Wireless Smart Camera ?

Modified on Fri, 31 May at 5:57 PM


Hybrone Omni Volt Wireless Smart Camera




INSTALLATION



Wall Installation


Mount the camera on a smooth surface.




Ceiling Installation

Assemble the device carefully.


 

Required Ingredients


 

Hybrone Omni Volt Wireless Smart Camera


Mounting plate and screws


Drill and suitable bits


Screwdriver


Pen or marker


Dowels (selected according to wall type and material)



Ceiling and Wall Mounting Steps



1. Determining the Mounting Location:


Select the area where you will place the camera. This should be where the camera will have the best viewing angle.


Make sure there is a power source for the camera and a strong Wi-Fi signal.



2. Preparing the Mounting Plate:


Place the mounting plate on the surface where you want to mount it.


Mark with a pencil where the plate will be screwed.



3. Drilling the Holes:


Use a drill to drill holes where you have marked.


Make sure that the holes match the material of the wall or ceiling (e.g. concrete, wood or drywall).


 

4. Inserting the Dowels:


If the surface to be mounted is made of materials such as drywall or brick, insert the appropriate dowels into the holes.


Make sure that the anchors are firmly in place.



5. Fixing the Mounting Plate:


Place the mounting plate over the holes.


Secure the plate firmly using the screws. It is important that the screws hold the plate firmly.


6. Mounting the Camera:


Attach the camera to the mounting plate.


Secure the camera with the locking mechanism or screws on the plate.


Make sure that the camera is securely in place.



7. Adjusting the Camera:


Adjust the camera to the desired angle. This should provide the optimal viewing angle of the camera.



8. Installing the Hybrone Camera:


Connect the camera to the power supply and follow the steps below.



How to Setup Hybrone Omni Volt Smart Camera ?

 


Additional Tips
Try to choose a location close to the modem or router to ensure that the camera has a stable Wi-Fi connection. For security, make sure that the camera's cables are properly concealed and protected.
These steps will make ceiling or wall mounting the Hybrone Omni Volt Wireless Smart Camera a breeze.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article